Heating jacket for drums of 200 liters can be used in hazardous areas. IECEx and ATEX approved for zones I and II. Made of elastomer material and silicone coated  glass fiber heates with a patented technology with semiconductive carbon membranes that guarantee safety conditions during the various operational phases even in the presence of potentially explosive gases. It does not require the use of transformers as functioning with normal voltages of alternating current power supply. 
The heating jacket is the ideal solution for a delicate process of heating and for preventing the product from freezing during the harsh winter. It's designed to heat plastic or steel drums, to reduce heat loss and improve the heating times, to shorten the operating time and liquefy solids at higher temperatures.



Power: 720 W

Voltage: 230 V - 50/60 Hz

Current: 3 A

Maximum temperature: 80°C

Protection: IP 44 and ATEX Zone I and II


Length: 1950 mm

Height: 850 mm

Weight: 9 kg

Material: elastometer and material in silicone coated glass fibre

Cable: 5 m without plug

Without regulation thermostat


All heating jackets for drums are manufactured in accordance with EC Directives. It is recommended not to put or keep in operation the heating jackets during the filling, refilling or drum emptying. It is also recommended not to keep the power cable plugged in during the movement of the heating jackets. In order to prevent spills of substances due to rise in their temperature it is recommended not to fill to the brim the drum and to work always in a well ventilated area.
Specially created for drums. Designed to heat from the outside, avoiding contact with the substances contained inside the drum. It does not contaminate nor burn the substances in the drum. 
Manufactured in elastometer and silicon coated glass fibre. 
Our heating jackets comply with EC standards.