Heating jacket for 200 L drums – AMARC srl

Heating jacket for 200 L drums

PRODUCT: CT/200-EX - ATEX
PRICE: On request

Heating jacket for 200 L drums for use in hazardous areas. ATEX and IECEx approved for Zones I and II. Made of elastomer material and fiberglass coated with silicone, it uses a patented technology with semi-conductive carbon membranes for heating that guarantee safety conditions during the various operating phases safe also in the presence of potentially explosive gases. It does not require the use of transformers as it works with normal voltages in alternate current.
The heating jacket is the ideal solution for a delicate heating process and to prevent the product from freezing during harsh winter. It is designed to heat plastic or steel drums, to reduce heat loss and improve heating times, to cut down operating times and liquefy solids at higher temperatures.

Health and Safety

All heating jackets are manufactured in accordance with EC directives. Do not start up or keep the heating jacket in operation during filling, refilling or emptying the drum. Also do not keep the power cable plugged in while handling the drum. In order to prevent spilling of substances due to the increase in their temperature, avoid filling the drums to the brim and always work in a well ventilated area.

Product advantages

Specially created for standard 200 L metal drums. Designed to heat from the outside, avoiding contact with the product contained in the drum.

Does not contaminate or burn the substance in the drum.

Made of elastomer and silicone coated fiberglass.

Our heating jackets comply with EC standards.

Technical data

Power: 720 W
Power supply: 230 V - 50/60 Hz
Current: 3 A
Maximum temperature: 80°C
Protection: IP 44 and ATEX Zone I and II
Length: 1950 mm
Height: 850 mm
Weight: 9 kg
Material: elastometer and material in silicone coated fiberglass
Cable: 5 m without plug
Thermostat: no thermostat for regulation