More

Contact

  • ITALY Via Artigiani, 37
    23874 Montevecchia (LC)
  • CONTACT tel. +39 039 578 051
    mail@amarc.com

INDUSTRIAL OVEN WITH FOR THE DRYING PROCESS ON THE IMPREGNATION LINES (4 INDEPENDENT ZONES)

Industrial Ovens and Dryers Drying

Oven with high level of customisation to completely satisfy the production needs of the customer thanks to:
Program for temperature management and control by means of the plc in which the software is designed and constructed ad hoc.
Management of batches by means of reader and bar code.
Temperature displays remote connected on board the machine on the side of each door.
Construction materials selected by the customer.
The oven also provides considerable versatility of operation thanks to the 4 temperature zones that make it possible to handle different parts at different temperatures without the need to interrupt the operating flows.

5.I.9.A

Oven with forced ventilation, equipped with 4 independent zones for the drying process on the impregnation lines.
Detail of oven in operation

5.I.9.B

Oven with forced ventilation, equipped with 4 independent zones for the drying process on the impregnation lines.
2 zones of oven ready for loading

5.I.9.D

Oven with forced ventilation, equipped with 4 independent zones for the drying process on the impregnation lines.
Detail loading zones 1, 3

5.I.9.E

Oven with forced ventilation, equipped with 4 independent zones for the drying process on the impregnation lines.
Detail of trolleys loading

5.I.9.F

Oven with forced ventilation, equipped with 4 independent zones for the drying process on the impregnation lines.
Detail of loading trolley

Technical data

Thermoregulation areas: 4
Working dimensions WxDxH in mm: 1050x650x2300 (each compartment)
Installation site : Indoor
Heating power supply: Electric
Nominal operating temperature: Up to +170℃
Temperature accuracy: +/- 2°C
Doors: 1 a single leaf door for each zone
Base: The oven is provided with a base made of 0.3 mm thick galvanised steel metal to make loading easier
Finish: The entire oven is made of galvanised steel, exterior painted RAL 7035 with standard cycle. The doors were made of AISI304 stainless steel according to the customer's request
Control panel (Process + Logic): Watertight panel installed on board the machine with process control in PID mode
Optional: Siemens PLC with 7" colour panel for temperature control, data recording and batch management (by means of bar code reader).
Doors made of AISI304 stainless steel.
Supply of 1 trolley per zone for loading/unloading operations. Each trolley is provided with 4 removable trays.