Oven for thermal processes.

The process requested by the customer requires the inner chamber to be filled with nitrogen before the thermal cycle begins.

The oven is therefore sized and structured to operate under pressure.

The oven has a double nitrogen inlet circuit; during the “Washing” phase both are in operation, while during the process only the secondary line remains open which compensates the leaks due to potential leaks, thereby ensuring that the inside of the oven is always pressurised, with constant reduction of the percentage of oxygen inside the chamber.

Technical data

Thermoregulation areas: 1
Working dimensions WxDxH in mm: 1700 x 1700 x 2100
Installation site : Indoor
Heating power supply: Electric
Nominal operating temperature: Up to +200°C
Temperature accuracy: +/- 3°C
Doors: 1 single leaf door
Base: The oven is set up with an insulated bottom (loading capacity up to 2000 kg) with infeed rails for goods loading trolleys
Finish: Oven interior made of AISI304 stainless steel with inner chamber welded completely to ensure airtight sealing, exterior made of carbon steel painted RAL 7035 with cycle for high temperatures
Control panel (Process + Logic): Built in control panel and wiring ducts. PID heating control mode