The oven was designed to perform with an extremely accurate cycle.

The customer, a manufacturer of bullet-proof panels, needs to subject composite materials to work cycles of +170°C, with +/-1°C accuracy with respect to the set point throughout the internal volume.

The accuracy of the temperatures is a high criticality to avoid material not conforming to its standards and therefore to be rejected.

For this purpose the thermodynamic and fluidodynamic design played a decisive role in addition to control of the power by means of thyristors and ventilation by means of inverter.

Technical data

Thermoregulation areas (Oven 1,2): 1
Working dimensions WxDxH in mm: 1200 x 1100 x 1250
Installation site : Indoor
Heating power supply: Electric
Nominal operating temperature: Ambient temperature +5°C to +180°C
Temperature accuracy: +/- 1°C
Doors: 1 single leaf door with 2 inspection windows
Base: The oven was constructed with insulated bottom with structure on feet
Finish: Galvanised steel oven interior, exterior carbon steel painted in RAL 7035 + RAL 5010
Control panel (Process + Logic): Watertight panel installed on board the machine with process control in PID mode
Optional: Inspection windows and internal lights