200 lt SINGLE DRUM HEATER - ATEX
(SFV-10/EX)

Induction heater for 200 lt drums and smaller containers in steel. Ideal solution to many problems of heating in areas classified as ATEX. The drum heater uses a single induction coil to directly heat the wall of the drum or container via an alternating magnetic field. This means that there is no transfer of heat by means of conventional and inefficient radiating elements. Since there are no hot elements, the heater is kept colder than the heated drum.

TECHNICAL DATA
 
Power: 2250 W
 
Voltage: 110 o 230 V
 
Current: 20,4 o 9,7 A
 
Maximum temperature of the drum walls: 123°C
 
Protection: IP 66, ATEX Zone I and II
 
 
FEATURES
 
Total diameter: 743 mm
 
Internal diameter: 643 mm
 
Height: 711 mm
 
Weight: 30 kg
 
Material: glassfiber
 
No long-term maintenance is required

HEALTH AND SAFETY

All drum heaters are manufactured in accordance with EC Directives. It is recommended not to put or keep in operation the drum heater during the filling, refilling or drum emptying. It is also recommended not to keep the power cable plugged in during the movement of the drum heater. In order to prevent spills of substances due to rise in their temperature it is recommended not to fill to the brim the drum and to work always in a well ventilated area.

PRODUCT ADVANTAGES

Specially created for steel drums.
Designed to heat from the outside, avoiding contact with the substances contained inside the drum.
It does not contaminate nor burn the substances in the drum. 
Manufactured in glassfiber. Our drum heaters comply with EC standards.