INDUSTRIAL OVEN FOR POST-PAINTING POLYMERISATION OF FRAMES – AMARC srl

INDUSTRIAL OVEN FOR POST-PAINTING POLYMERISATION OF FRAMES

The customer expressed the need to install an oven with high production efficiency with a double purpose: improve the quality of the polymerisation process and speed up the work flow for the operators.
The production demand was met by correctly sizing the compartments of the oven, of the quantity and dimensions of the trays.
The output quality of the oven that made it possible for the customer to reduce the rejects obtained from the previous system significantly was obtained by means of:

  • The mechanical design (high insulation with low heat dispersal)
  • The thermodynamic design (correct thermal balance designed to deal with the frequent loading-pickup operations)
  • Fluidodynamic (the optimum sizing of the air flow ensured optimum output of the process on the heated parts).

Technical data

Thermoregulation areas: 1
Working dimensions WxDxH in mm: Two compartments each 500x700x1700
Installation site : Indoor
Heating power supply: Electric
Nominal operating temperature: Up to +200°C
Temperature accuracy: +/- 2°C
Doors: 2 automatic single leaf doors for each zone
Base: The oven is provided with a structured insulated bottom with adjustable feet
Finish: Chamber interior made of galvanised steel, exterior made ofcarbon steel RAL 7035 painted with standard cycle
Control panel (Process + Logic): Watertight panel installed on board the machine with process control in PID mode
Optional: Provision for loading trays.
Automatic doors.